Kyoritsu

  • Filter
Created on: 15 May 2014

AC and DC voltage tests up to 690V with LEDs and LCD • Comply with the latest standards IEC 61243 and IEC 61010 • Novel designLarge and bright LEDs: Values are visible in the dark placeErgonomic design fits in the hand • Two functions are available in one model"Measurement without battery" and "Self Test (all LED on)" • Test leads withstand harsh environments at low temperature • Penlight (white LED) • Auto-power ON/OFF • Audible indication • Variable test tips, φ2mm or φ4mm • Probe protection cover can store the attachment of caps • IP65 (IEC 60529)

Created on: 15 May 2014

AC and DC voltage tests up to 690V with LED • Comply with the latest standards IEC 61243 and IEC 61010 • Novel designLarge and bright LEDs: Values are visible in the dark placeErgonomic design fits in the hand • Two functions are available in one model"Measurement without battery" and "Self Test (all LED on)" • Test leads withstand harsh environments at low temperature • Penlight (white LED) • Auto-power ON/OFF • Audible indication • Variable test tips, φ2mm or φ4mm • Probe protection cover can store the attachment of caps • IP65 (IEC 60529)

Category: Earth Testers
Created on: 15 May 2014

The latest circuit design permits the instrument to operate with the minimum of influence from earth voltage and earth resistance of auxiliary earth spikes. • Dust and drip proof. (designed to IEC 529 IP54) • Earth resistance value can be read directly from the scale. • Designed to meet IEC 61010-1 safety standard. • Capable of measuring earth voltage. • Small and lightweight. Shock resistant new case material. • 2mA measuring current permits earth resistance tests without tripping earth leakage current breakers in the circuit under test. • Lead wire connection to C and P terminals and proper auxiliary earth resistance can be checked by "OK" lamp. Lead wire connection to C and E terminals is good when "OK" lamp is illuminated.

Category: Earth Testers
Created on: 15 May 2014

Dust and drip proof.(designed to IEC 529 IP54) • In addition to the facility for precision measurement, test leads for simplified two wire measuring system also supplied as standard accessories.(unit can be hung from the neck for simplified measurement) • Designed to meet IEC 61010-1 safety standard. • Capable of measuring earth voltage. • Automatic warning when resistance of auxiliary earth spikes is in excess of tolerance. • Small and lightweight. Shock resistant new case material. • 2mA measuring current permits earth resistance tests without tripping earth leakage current breakers in the circuit under test.

Category: Earth Testers
Created on: 15 May 2014

KEW 4300 is simplified earth resistance tester (based on 2-pole method) that can be used for various distribution lines and electrical appliances and it also can measure AC/DC voltage. (As for AC Voltages, true rms values can be obtained.)   • 200/2000Ω (2 ranges): auto-ranging. • Warning buzzer triggered at 100Ω or less. • LED lights up when a large earth voltage is detected. • Live circuit warning when 30V or higher voltage is detected. (KEW 4300 detects voltage even when measuring resistances.) • LED light for illuminating measurement points.(It turns on/off automatically in relation to the ambient brightness.) • Small test current (max 2mA) not triggering RCD.

Category: Earth Testers
Created on: 15 May 2014

Earth Resistance & Resistivity Tester High test current up to 80mA yielding resolution of 0.001Ω on 2Ω range. • Advanced Filtering method (based on FFT Fast Fourier Transform) reduces noise interference for obtaining stable measurements. • Automatic and Manual selection of the Test Current Frequency in four bands (94/105/111/128Hz). In Automatic mode, KEW 4106 will select the most suitable Frequency. • Several sub-results can be shown on the display: Resistance of the Auxiliary Earth Spikes, Frequency of Test Current, Voltage and Frequency of Interference (noise), Residual Resistance Rk, etc. • Warning for excessive noise and high Auxiliary Earth Spikes resistance.

Category: Earth Testers
Created on: 15 May 2014

Earth Clamp Tester The earth resistance from 0.05 to 1200Ω can be measured without the auxiliary earth spikes.(The Multiple Earthing System.) • True RMSAccurate true RMS readings of AC current including distorted waveform from 1mA to 30.0A • Noise Check Function A function to detect current, which effects on an earth resistance measurement and display "NOISE" mark on the LCD. • Memory function Save and display up to 100 measurement data. • Data hold function / Buzzer function / Back light function • Compliant with Safety Standards of IEC 61010-1 : CAT.IV 300V Pollution degree2   Note:A single earthing can not be measured. (Only for Multiple Earthing System)

Category: Earth Testers
Created on: 15 May 2014

Earth Clamp Tester Various useful functions are available on Android devices using Bluetooth communication   Free Android software "KEW smart 4202"is available on "Google Play Store" (*) Supporting Android ver. 2.2 - 4.2 WVGA (800 × 480) resolution or higher (*) Please search "KEW Smart" in Google Play Store.Communication charge may be incurred separately to download application.   • Real time measurements can be transferred, shown and saved on Android device (up to 100 measurements) • Saved data includes measurement, GPS location and date & timeEasy to check on map "When" and "Where" the measurement was made • Comparator function on Android device informs when the measured value is lower/higher than the preset value